Environment Configuration
Network
| Device | Default example | Requirement |
|---|---|---|
| Tianzhun controller | 6.6.7.100 | Use the delivered site address |
| Dual-arm controller | 6.6.7.190 | Must match the controller configuration |
| Host PC | 6.6.7.xxx | Same subnet with no address conflict |
| Pico / Meta Quest | Independent address on the same subnet | The Apex client connects to the Tianzhun IP |
ping 6.6.7.100
No two devices may share an IP address. Before changing the site subnet, update and verify the robot controller, Tianzhun controller, host PC, and headset together.
Software compatibility
- Use the robot controller, Gento SDK, Teleop service, Apex frontend, and headset client from the same delivery release.
- The current Pro source-review target is
gento-apex 1.1.7.1with Gento SDK4.7.1. The source still marks this target as unreleased, and it no longer uses MarvinSDK as its control runtime. Follow the customer delivery manifest for the installed version. - Package filenames change by release; use the delivered files and release notes.
- Enable Tool and Camera according to the installed options.
Cameras
The UI always displays four tiles. A disabled camera_sources entry appears black. For example, 0, 1, none, none enables only the first two views and is a valid configuration.
Back up the configuration and contact support before changing camera IDs, wiring, or calibration. Do not edit camera configuration while the robot is operating.
Headset
Marvin Pro supports Pico and Meta Quest. The headset must be on the same LAN as the Tianzhun controller. Enter the Tianzhun address, not the headset's own address, in the headset client.